|Has a Kit||Downloaded Software||Account Needed||3D Printed||Chromebook Compatible||iPad Compatible|
This is the OLD version of the challenge and it is not recommended. Please use the OnShape version of the challenge. Please use the most recent version of the challenge. In Jewelry Designer v1: Sketchup, students will use 123Design to design jewelry that is then printed on the 3D printer.
What You Should Know
The 123Design software is no longer available for download.
You do not need to download any design software and students are automatically taken to the website through the challenge page.
The constraints of the challenge mean that the print should take around 20 to 30 minutes to produce a single student project.
The kit contains common hardware used in simple jewelry fabrication.
Make sure you have activated the most recent version of the challenge and only that version.
- Please add your tips, tricks, questions, and comments below.
Downloaded Software: Sketchup Make
External Websites: None
Account Needed: No